Maximum Head 80 metres
Maximum Flow 1200 litres per hour
Another small unit most effective at heads up to 70m.
This submersible pump is suitable for 4″ or larger bores and will fit older 4” cast iron bore casings. It is used for pumping water from bores, rivers, dams, creeks and springs and transferring water from one site to another.
It is easy to install and costs nothing to run after installation.
This Helical rotor pump does not require expensive inverters and batteries to operate, however the controller will allow the use of storage batteries if required.
3″ 210W/36V stainless steel solar pump pre-wired with power cable (length determined at time of order)
1 x 250W solar panel
1 x single panel mounting frame
Auto control box
One spare helical screw rotor
2 x MC4 extension cable to connect solar panel to control box
1 x 40m & 10m combined water sensor (one for bore and one for tank)
Cable water proof join connector kit
12 months back to base warranty
Pump power: 210W/36V-DC
Pump type: Helical screw
Max flow: 35l/min
Max head: 80m
Dimension: 76mm x 400mm
Maximum submersion depth: 30m
Auto control box specifications
Water level control of tank and bore by sensors
Motor speed adjustable
Low power protection
Solar and/or battery power input option
MPPT Maximum Power Point Tracking system
Allow input power voltage up to 100V/DC (solar panel open circuit)