Maximum Head 140 metres
Maximum Flow 2700 litres per hour
The highest head pump in the range it will deliver 1000 L/Hr at 100m head.
Easy to install and costs nothing to run after installation.
This helical rotor pump does not require expensive inverters and batteries to operate, however the controller will allow the use of storage batteries if required
This submersible pump is suitable for 5″ or larger bores. It can also be used for pumping water from rivers, dams, creeks and springs and transferring water from one site to another.
4″ 1000W/110V stainless steel solar pump with prewired power cable (length determined at time of order)
4 x 250w solar panel
2 x dual panel mounting frames
Auto control box
One spare helical screw rotor
2 x MC4 cable extension to connect solar panels to control box
2 x 10M combined water sensors ( one for bore and other for tank)
Cable water proof join connector kit
12 months back to base warranty.
Pump power: 1000W/110V-DC
Pump type: Helical screw rotor
Max flow: 45L/min or 2700L/h
Max heads: 140M
Dimension: 100mm x 700mm
Maximum submerge depth: <40m Auto control box specifications
Water level control of tank and bore by sensors
Motor speed adjustable
Low power protection
Solar and/or batteries power input option
MPPT Maximum Power Point Tracking system
Allow input power voltage up to 100V/DC (solar panel open circuit)